LineBoss Filament
Own The Build
LineBoss PETG-CF Filament
$18.99
1 kg / 2.2 lb spool $18.99/kg
LineBoss PETG-CF Black is carbon-fiber-reinforced PETG for functional FDM/FFF printing. Choose it when you want a rigid, low-sheen black finish for brackets, jigs, fixtures, housings and working prototypes.
Material and spool
- Material: PETG reinforced with carbon fiber
- Color: Black
- Filament diameter: 1.75 mm
- Net filament weight: 1 kg / 2.2 lb per spool
- Finish: textured, low-sheen carbon-fiber appearance
Printing and hardware guidance
- Use a hardened or other wear-resistant nozzle. Carbon-fiber-filled filament is abrasive and can wear standard brass nozzles.
- A 0.6 mm wear-resistant nozzle is a practical starting choice; confirm your printer and feeder support abrasive composite filament.
- Use the spool label and printer manufacturer's PETG-CF guidance to establish temperature, flow and cooling settings, then calibrate for your machine. No universal tested slicer profile is supplied.
- Store sealed with desiccant. If moisture symptoms appear, dry according to the spool label and the temperature limits of your spool and dryer.
Choose for the application
Useful for tooling aids, organizers, mounts, enclosures and technical prototypes. Validate layer orientation, part design and service conditions before use; reinforcement does not establish a certified load or temperature rating.
Read our PETG-CF material guide, or contact LineBoss for setup help.
Printer setup help
Need help dialing in this LineBoss material?
Start with the hardware guidance on this page and the instructions on your spool label. Send us your printer model, nozzle size, build plate, slicer, and a photo of the print for targeted setup help.
Running repeat jobs? Ask about bulk ordering, batch notes, and PO or tax-exempt ordering support.
Why makers buy this spool
carbon-fiber PETG filament for confident prints
- 1.75mm carbon-fiber-reinforced PETG in Black
- Full 1 kg spool for functional printing
- Low-sheen, textured technical appearance
- Useful for brackets, jigs, fixtures, housings, and prototypes
- Practical setup help from LineBoss
Recommended starting settings
PETG-CF hardware and setup
- Nozzle: use hardened steel or another wear-resistant material
- Nozzle size: 0.6 mm is a practical starting choice for filled filament
- Temperature, flow, and cooling: follow the spool label and tune your PETG-CF baseline
- Storage: keep sealed with desiccant and follow spool-safe drying instructions
- Feeding: verify your feeder supports abrasive composite filament
Printer setup help
Need help dialing in this LineBoss material?
Start with the hardware guidance on this page and the instructions on your spool label. Send us your printer model, nozzle size, build plate, slicer, and a photo of the print for targeted setup help.
Running repeat jobs? Ask about bulk ordering, batch notes, and PO or tax-exempt ordering support.
Best for: brackets, jigs, fixtures, mounts, housings, and functional prototypes
Avoid for: flexible parts, standard brass nozzles, and applications requiring an unverified strength or temperature rating
Next step: Read the PETG-CF guide below or contact LineBoss with your printer and nozzle details.