LineBoss Carbon Fiber PLA contains premium carbon fiber for higher stiffness and strength, helping printed models resist deformation under impact and improve structural bearing capacity compared with basic PLA.
Key Features
- Matte surface with minimal layer lines
- Infused with carbon fibers for added strength and rigidity
- Improved hardness and rigidity
- Easy and smooth printing
- Tangle-free and no clogging
- Well sealed vacuum packing for moisture-free storage
Applications
- Hardness parts
- Spacer components
- Structural components
- Ornamental parts
- Design prototyping
LineBoss support
Use a wear-resistant nozzle for filled filament and validate strength, temperature, and layer orientation before production use. LineBoss can help with practical starting settings.
Printer setup help
Need help dialing in this LineBoss material?
Use the numeric starting profile on this page. If the result needs work, send us your printer model, nozzle size, build plate, slicer, and a photo of the print so we can recommend a targeted adjustment.
Running repeat jobs? Ask about bulk ordering, batch notes, and PO or tax-exempt ordering support.
LineBoss Filament
Own The Build
LineBoss Carbon Fiber PLA Filament
$18.99
$23.99
1 kg / 2.2 lb spool $18.99/kg
Why makers buy this spool
carbon-fiber PLA filament for confident prints
- 1.75mm filled PLA for stiff, low-shine parts
- Technical surface finish helps soften visible layer lines
- Useful for prototypes, fixtures, tooling aids, and display parts
- A wear-resistant nozzle is recommended
- Product-specific setup guidance included
Recommended starting settings
Stiff CF-PLA starting profile
- Nozzle: start at 210°C; working range 190-220°C
- Bed: start at 50°C; working range 30-60°C
- Speed: start at 60 mm/s; qualified range 40-100 mm/s
- Part cooling: start at 75% after layer 3
- Drying: 50°C for 4-6 hours when wet
- Hardware: hardened 0.4 mm nozzle minimum; 0.6 mm preferred
Printer setup help
Need help dialing in this LineBoss material?
Use the numeric starting profile on this page. If the result needs work, send us your printer model, nozzle size, build plate, slicer, and a photo of the print so we can recommend a targeted adjustment.
Running repeat jobs? Ask about bulk ordering, batch notes, and PO or tax-exempt ordering support.
Best for: stiff prototypes, fixtures, tooling aids, housings, and technical-looking parts
Avoid for: food contact, safety-critical parts, or long runs through a standard brass nozzle
Next step: Need easier everyday printing? Try PLA+. Need tougher non-filled parts? Try PETG.
Complete technical specifications
LineBoss Carbon-fiber PLA specifications
| Material | Carbon-fiber PLA |
|---|---|
| Appearance | Gloss |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mm |
| Net weight | 1 kg / 2.2 lb net weight |
| Approximate length | 335 ±5 m |
| Spool format | Standard 1 kg spool |
| Nozzle range | 190-220°C |
| Bed range | 30-60°C |
| Print-speed range | 40-100 mm/s |
| Part-cooling baseline | 75% after layer 3 |
| Drying | 50°C; 4-6 hours when wet |
| Retraction baseline | 0.8 mm direct drive / 4 mm Bowden at 25-35 mm/s |
| Raft separation | 0.2 mm |
| Enclosure | Not required |
| Multi-material systems | Confirm the feeder supports abrasive filled filament |
| Nozzle | Hardened 0.4 mm minimum; 0.6 mm preferred |