The LineBoss HD100 is a 3D filament dryer designed to heat filament evenly, support visual operation, provide timed drying, and work with multiple filament coils.
Key Features
- Fast heating in all directions
- Convenient and visual operation
- Time function
- Compatible with multiple coil
Applications
- Filament drying
- Moisture control before printing
- Printer-side filament handling
LineBoss support
Use LineBoss drying targets as your baseline: 50°C for PLA-family materials and TPU, 70°C for PETG, 75-85°C for ASA, and 90°C for ABS. Center the spool, confirm free rotation, keep the air paths clear, and use a short low-resistance feed path when printing while drying. LineBoss provides U.S.-based product and setup support.
Printer setup help
Need help setting up the HD100?
Tell us the filament, spool size, moisture symptoms, and whether you plan to print while drying. We will help select a temperature, time, and feed path.
LineBoss Filament
Own The Build
LineBoss HD100 Filament Dryer
$34.99
$39.99
Filament care equipment
Why shops use this dryer
filament care equipment for confident prints
- Helps prepare moisture-sensitive filament for cleaner printing
- Purpose-built LineBoss HD100 drying equipment
- Useful for open spools, humid shops, and repeat production
- Pair drying time and temperature with the material guidance
- Supported by LineBoss in the U.S.
Recommended starting settings
Set up the HD100 correctly
- Load: center one spool and confirm it rotates freely before closing the lid
- Outlet: route filament to the printer without a sharp bend or side load
- Timer: begin with 4 hours; extend only when moisture symptoms remain
- LineBoss targets: PLA family and TPU 50°C; PETG 70°C; ASA 75-85°C; ABS 90°C
- Print while drying: keep the feed path short, smooth, and low-resistance
- Placement: use a hard, level, ventilated surface and keep air paths clear
Printer setup help
Need help setting up the HD100?
Tell us the filament, spool size, moisture symptoms, and whether you plan to print while drying. We will help select a temperature, time, and feed path.
Best for: preparing open or moisture-sensitive filament before printing
Avoid for: blocked airflow, kinked feed paths, or temperature settings above the spool material limit
Next step: Pair it with LineBoss PLA+, PETG, TPU, ABS, ASA, or specialty PLA.
Complete technical specifications
LineBoss HD100 filament dryer specifications
| Model | HD100 |
|---|---|
| Function | Heated filament drying, moisture control, and printer-side spool handling |
| Heating | Multi-directional warm-air heating |
| Controls | Visual display with timed operation |
| Spool handling | Supports multiple common spool formats; confirm free rotation before use |
| Print while drying | Supported with a short, smooth, low-resistance feed path |
| Drying targets | PLA family and TPU: 50°C; PETG: 70°C; ASA: 75-85°C; ABS: 90°C |
| Placement | Hard, level, ventilated surface with all air paths unobstructed |