Narrow the field, open the details, then compare up to four machines. Separate tools, chamber heating and material ecosystems matter more than a single headline speed.
Dental desktop resin ecosystem. Printer, resin, wash and cure validation must be matched; generic material support does not establish approval for patient use.
Dental desktop resin ecosystem. Printer, resin, wash and cure validation must be matched; generic material support does not establish approval for patient use.
Dental desktop resin ecosystem. Printer, resin, wash and cure validation must be matched; generic material support does not establish approval for patient use.
Manufacturer image; package may include optional accessories
Sources reviewed:
Asiga
MAX X27 Plus
ResinManufacturer listed
Build space (mm)
51.8 × 29.2 × 75 mm
Native XY pixel pitch (µm)
27
Resin vat
Specifications & sources
Motion system
Not verified
Usable-area conditions
This is the 385 nm configuration. Verify the optical configuration and resin profile in the ordered package.
Enclosure / chamber
UV cover • not an air-extraction system
Software
Asiga Composer
Resin wavelength
385 nm
Native XY pixel pitch (µm)
27
Resin heating
Not verified
Material ecosystem
Resin profile / wavelength must be validated
Precision desktop DLP ecosystem. Match printer wavelength, resin profile and post-processing; do not compare pixel size across different optical configurations as one specification.
Manufacturer image; package may include optional accessories
Sources reviewed:
Asiga
MAX X35 Plus
ResinManufacturer listed
Build space (mm)
67.2 × 37.8 × 75 mm
Native XY pixel pitch (µm)
35
Resin vat
Specifications & sources
Motion system
Not verified
Usable-area conditions
This is the 385 nm configuration. Verify the optical configuration and resin profile in the ordered package.
Enclosure / chamber
UV cover • not an air-extraction system
Software
Asiga Composer
Resin wavelength
385 nm
Native XY pixel pitch (µm)
35
Resin heating
Not verified
Material ecosystem
Resin profile / wavelength must be validated
Precision desktop DLP ecosystem. Match printer wavelength, resin profile and post-processing; do not compare pixel size across different optical configurations as one specification.
Manufacturer image; package may include optional accessories
Sources reviewed:
Asiga
MAX X43 Plus
ResinManufacturer listed
Build space (mm)
82.3 × 46.4 × 75 mm
Native XY pixel pitch (µm)
43
Resin vat
Specifications & sources
Motion system
Not verified
Usable-area conditions
This is the 385 nm configuration. Verify the optical configuration and resin profile in the ordered package.
Enclosure / chamber
UV cover • not an air-extraction system
Software
Asiga Composer
Resin wavelength
385 nm
Native XY pixel pitch (µm)
43
Resin heating
Not verified
Material ecosystem
Resin profile / wavelength must be validated
Precision desktop DLP ecosystem. Match printer wavelength, resin profile and post-processing; do not compare pixel size across different optical configurations as one specification.
Manufacturer image; package may include optional accessories
Sources reviewed:
AtomForm
Palette 300
FilamentAnnounced • not retail verified
Build space (mm)
300 × 300 × 300 mm
Max nozzle temperature
Not verified
Hotend / nozzle swapping
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Not verified
Software
OrcaSlicer / manufacturer slicer (check model profile)
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
12
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Manufacturer-demonstrated 12-nozzle concept. Retail delivery and final package availability are not established here; treat performance as announced claims.
Single-nozzle workspace. Dual-nozzle overlap is 300 × 320 × 325 mm; combined envelope is not the size of one dual-material part.
Enclosure / chamber
Enclosed • dedicated heater
Software
Bambu Studio
Max nozzle temperature
350 °C
Max bed temperature
120 °C
Chamber temperature claim
65 °C
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Wear-resistant hardware listed
Dual tungsten-carbide nozzles, Ethernet and enterprise Wi-Fi support distinguish the Pro package. Verify the exact AMS/dryer bundle and supported software access.
Manufacturer image; package may include optional accessories
Sources reviewed:
Craftbot
FLOW IDEX
FilamentManufacturer listed
Build space (mm)
425 × 250 × 250 mm
Max nozzle temperature
300 °C
IDEX • independent dual extrusion
Specifications & sources
Motion system
Not verified
Usable-area conditions
Single-tool envelope: 425 × 250 × 250 mm. Dual-material: 386 × 250 × 250 mm. Mirrored/duplication modes reduce the per-part workspace.
Enclosure / chamber
Not verified
Software
CraftWare Pro / model-supported OrcaSlicer profile
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Independent tools allow dual-material and duplication workflows. Duplication/mirror printing has a smaller per-part workspace; confirm the selected mode and enclosure accessories.
Manufacturer image; package may include optional accessories
Sources reviewed:
Craftbot
FLOW IDEX MK2
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
300 °C
IDEX • independent dual extrusion
Specifications & sources
Motion system
Not verified
Usable-area conditions
—
Enclosure / chamber
Not verified
Software
CraftWare Pro / model-supported OrcaSlicer profile
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Independent tools allow dual-material and duplication workflows. Duplication/mirror printing has a smaller per-part workspace; confirm the selected mode and enclosure accessories.
Manufacturer image; package may include optional accessories
Sources reviewed:
Craftbot
FLOW IDEX XL
FilamentManufacturer listed
Build space (mm)
425 × 250 × 500 mm
Max nozzle temperature
300 °C
IDEX • independent dual extrusion
Specifications & sources
Motion system
Not verified
Usable-area conditions
Single-tool envelope: 425 × 250 × 500 mm. Dual-material: 386 × 250 × 500 mm. Mirrored/duplication modes reduce the per-part workspace.
Enclosure / chamber
Not verified
Software
CraftWare Pro / model-supported OrcaSlicer profile
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Independent tools allow dual-material and duplication workflows. Duplication/mirror printing has a smaller per-part workspace; confirm the selected mode and enclosure accessories.
Full-color UV-curable material jetting with water-soluble support. Not a conventional open-vat resin printer; inks, support and maintenance are a separate ecosystem.
Validated material workflow; third-party material use requires checking Open Material Mode and its exact printer/resin conditions. Biocompatible workflows require the appropriate B/BL machine, material and post-processing validation.
Validated material workflow; third-party material use requires checking Open Material Mode and its exact printer/resin conditions. Biocompatible workflows require the appropriate B/BL machine, material and post-processing validation.
Validated material workflow; third-party material use requires checking Open Material Mode and its exact printer/resin conditions. Biocompatible workflows require the appropriate B/BL machine, material and post-processing validation.
Validated material workflow; third-party material use requires checking Open Material Mode and its exact printer/resin conditions. Biocompatible workflows require the appropriate B/BL machine, material and post-processing validation.
Desktop Low Force Display platform with a dedicated material and post-processing lineup. Check included materials, Open Material Mode access and wash/cure equipment separately.
Full-3D-capable G1X configuration. Base UV/texture printing is not equivalent to volumetric 3D printing; verify the expansion package and delivery schedule.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
Mini 3
FilamentManufacturer listed
Build space (mm)
180 × 180 × 180 mm
Max nozzle temperature
290 °C
One nozzle
Specifications & sources
Motion system
CoreXZ
Usable-area conditions
Standard Meteor 175 toolhead uses 1.75 mm filament; an optional 2.85 mm configuration changes material compatibility.
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / Klipper / Mainsail
Max nozzle temperature
290 °C
Max bed temperature
100 °C
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
SideKick 747
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / model-supported slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
TAZ 8
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / model-supported slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
TAZ 8 Long Bed
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / model-supported slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
TAZ 8 XT
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / model-supported slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
LulzBot
TAZ Workhorse 2
FilamentManufacturer listed
Build space (mm)
Not verified
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Cura LulzBot Edition / model-supported slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Current manufacturer catalog. Toolhead options change filament diameter, temperature and abrasive readiness; confirm the exact supplied toolhead before purchasing material.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
BIG-120X GEN5
FilamentSelf-build project / kit
Build space (mm)
1200 × 600 × 640 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
BIG-120Z GEN5
FilamentSelf-build project / kit
Build space (mm)
600 × 600 × 1200 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
BIG-180X GEN5
FilamentSelf-build project / kit
Build space (mm)
1800 × 600 × 600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
BIG-60 GEN5
FilamentSelf-build project / kit
Build space (mm)
600 × 600 × 660 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
BIG-Meter GEN5
FilamentSelf-build project / kit
Build space (mm)
1000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
Modix
Everest GEN5
FilamentSelf-build project / kit
Build space (mm)
970 × 1030 × 2000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Optional accessory / configuration
Software
Duet / compatible slicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Depends on selected components
Filament diameter
1.75 mm
Abrasive readiness
Depends on selected components
Workshop-scale self-assembly system; onsite assembly and IDEX/enclosure/high-flow options change the package. Measure access doors, floor loading and service clearance.
Identification photo may show an earlier chassis/accessory configuration; confirm GEN5 package contents.
Large and small Phrozen vats, films and build plates are model specific. Check whether heating and air handling are included in the selected regional package.
Large and small Phrozen vats, films and build plates are model specific. Check whether heating and air handling are included in the selected regional package.
Large and small Phrozen vats, films and build plates are model specific. Check whether heating and air handling are included in the selected regional package.
Large and small Phrozen vats, films and build plates are model specific. Check whether heating and air handling are included in the selected regional package.
Large and small Phrozen vats, films and build plates are model specific. Check whether heating and air handling are included in the selected regional package.
Manufacturer image; package may include optional accessories
Sources reviewed:
Prusa
CORE One+ (Gen 2)
FilamentManufacturer listed
Build space (mm)
250 × 220 × 270 mm
Max nozzle temperature
290 °C
Filament switching • one nozzle
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Temperature-controlled enclosure
Software
PrusaSlicer / Prusa Connect
Max nozzle temperature
290 °C
Max bed temperature
120 °C
Chamber temperature claim
55 °C
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Wear-resistant hardware upgrade needed
Kit and assembled options. Ventilation regulates the enclosure; confirm the heater arrangement before treating chamber temperature like a dedicated chamber heater. MMU3 is optional.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Wear-resistant hardware listed
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
320 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
320 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
300 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Single-extruder envelope. Dual-material, duplication and mirror modes have a smaller usable area.
Enclosure / chamber
Enclosed • no dedicated heater
Software
ideaMaker / RaiseCloud
Max nozzle temperature
320 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Independent/dual extrusion and model-specific material packages. Check nozzle upgrades, dry storage and usable shared print area before choosing the configuration.
Manufacturer image; package may include optional accessories
Sources reviewed:
Sovol
M1D Advanced
FilamentPreorder / crowdfunding
Build space (mm)
300 × 300 × 350 mm
Max nozzle temperature
Not verified
Tool-changing system
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • dedicated heater
Software
Klipper / OrcaSlicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
60 °C
Tools / nozzles
7
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Manufacturer-described DualX 1+6 system. Shared printing area depends on operating mode. Crowdfunding/preorder performance is not independently established here.
Manufacturer image; package may include optional accessories
Sources reviewed:
Sovol
M1D Essential
FilamentPreorder / crowdfunding
Build space (mm)
300 × 300 × 350 mm
Max nozzle temperature
Not verified
Tool-changing system
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Klipper / OrcaSlicer
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
7
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Manufacturer-described DualX 1+6 system. Shared printing area depends on operating mode. Crowdfunding/preorder performance is not independently established here.
Newly manufacturer-announced chairside platform. Confirm regional ordering, production specifications, material validation and delivery before committing.
Dental resin workflow requires an exact printer/material/wash/cure combination. Confirm current region-specific materials and consumables before purchase.
Dental resin workflow requires an exact printer/material/wash/cure combination. Confirm current region-specific materials and consumables before purchase.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
CRUX1
FilamentManufacturer listed
Build space (mm)
180 × 180 × 180 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
D01 Plus Guard
FilamentManufacturer listed
Build space (mm)
330 × 330 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
D01 Plus Guard V2
FilamentManufacturer listed
Build space (mm)
330 × 330 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
GEMINI 800
FilamentManufacturer listed
Build space (mm)
800 × 800 × 800 mm
Max nozzle temperature
Not verified
IDEX • independent dual extrusion
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1
FilamentManufacturer listed
Build space (mm)
255 × 255 × 255 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-16
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-16-PRO
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-16-PRO-2E
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1600 mm
Max nozzle temperature
Not verified
Filament switching • one nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-16A
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-20
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 2000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-20-PRO
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 2000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-20-PRO-2E
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 2000 mm
Max nozzle temperature
Not verified
Filament switching • one nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-20A
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 2000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-Pro
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000-PRO-2E
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
Filament switching • one nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1000A
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1012A
FilamentManufacturer listed
Build space (mm)
1000 × 1000 × 1200 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-1A
FilamentManufacturer listed
Build space (mm)
255 × 255 × 255 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-2010-10
FilamentManufacturer listed
Build space (mm)
2000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-2010-10A
FilamentManufacturer listed
Build space (mm)
2000 × 1000 × 1000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-3
FilamentManufacturer listed
Build space (mm)
330 × 330 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-3A
FilamentManufacturer listed
Build space (mm)
330 × 330 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-4
FilamentManufacturer listed
Build space (mm)
400 × 400 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-4A
FilamentManufacturer listed
Build space (mm)
400 × 400 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-500-PRO
FilamentManufacturer listed
Build space (mm)
500 × 500 × 500 mm
Max nozzle temperature
320 °C
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
320 °C
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-500A
FilamentManufacturer listed
Build space (mm)
500 × 500 × 500 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-600-PRO
FilamentManufacturer listed
Build space (mm)
600 × 600 × 600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-600A
FilamentManufacturer listed
Build space (mm)
600 × 600 × 600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-800-12
FilamentManufacturer listed
Build space (mm)
800 × 800 × 1200 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-800-20
FilamentManufacturer listed
Build space (mm)
800 × 800 × 2000 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-800-Pro
FilamentManufacturer listed
Build space (mm)
800 × 800 × 800 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-800-PRO-2E
FilamentManufacturer listed
Build space (mm)
800 × 800 × 800 mm
Max nozzle temperature
Not verified
Filament switching • one nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
VEHO-800A
FilamentManufacturer listed
Build space (mm)
800 × 800 × 800 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
X5SA
FilamentManufacturer listed
Build space (mm)
330 × 330 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
X5SA-500 Pro
FilamentManufacturer listed
Build space (mm)
500 × 500 × 600 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
XY-2 Pro
FilamentManufacturer listed
Build space (mm)
255 × 255 × 260 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
XY-2 Pro-2E
FilamentManufacturer listed
Build space (mm)
255 × 255 × 245 mm
Max nozzle temperature
Not verified
Filament switching • one nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Check single-tool, common, duplication and mirrored workspace separately. Two filament inputs into one nozzle are not two independently positioned tools.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
XY-3 Pro V2
FilamentManufacturer listed
Build space (mm)
300 × 300 × 400 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Direct drive
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
Tronxy
XY-3 SE
FilamentManufacturer listed
Build space (mm)
255 × 255 × 260 mm
Max nozzle temperature
Not verified
One nozzle
Specifications & sources
Motion system
Cartesian
Usable-area conditions
—
Enclosure / chamber
Open frame
Software
Confirm the supported slicer and firmware for the exact model.
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
1
Extruder feed path
Not verified
Filament diameter
Not verified
Abrasive readiness
Not verified
Large-format and kit packages require assembly/commissioning and adequate floor space. Confirm the exact hotend, voltage, heater and included enclosure.
Manufacturer image; package may include optional accessories
Sources reviewed:
UltiMaker
Factor 4 Plus
FilamentManufacturer listed
Build space (mm)
330 × 240 × 300 mm
Max nozzle temperature
340 °C
Dual nozzles
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • dedicated heater
Software
UltiMaker Cura / Digital Factory
Max nozzle temperature
340 °C
Max bed temperature
120 °C
Chamber temperature claim
70 °C
Tools / nozzles
2
Extruder feed path
Direct drive
Filament diameter
1.75 mm
Abrasive readiness
Not verified
Print-core and material compatibility depend on the chosen core. S-series uses 2.85 mm filament; Factor 4 uses 1.75 mm. Check enclosure/air-manager package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
UltiMaker
S3
FilamentManufacturer listed
Build space (mm)
230 × 190 × 200 mm
Max nozzle temperature
Not verified
Dual nozzles
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
UltiMaker Cura / Digital Factory
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Bowden / remote feed
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Print-core and material compatibility depend on the chosen core. S-series uses 2.85 mm filament; Factor 4 uses 1.75 mm. Check enclosure/air-manager package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
UltiMaker
S6
FilamentManufacturer listed
Build space (mm)
330 × 240 × 300 mm
Max nozzle temperature
Not verified
Dual nozzles
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
UltiMaker Cura / Digital Factory
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Bowden / remote feed
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Print-core and material compatibility depend on the chosen core. S-series uses 2.85 mm filament; Factor 4 uses 1.75 mm. Check enclosure/air-manager package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
UltiMaker
S7
FilamentManufacturer listed
Build space (mm)
330 × 240 × 300 mm
Max nozzle temperature
Not verified
Dual nozzles
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
UltiMaker Cura / Digital Factory
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Bowden / remote feed
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Print-core and material compatibility depend on the chosen core. S-series uses 2.85 mm filament; Factor 4 uses 1.75 mm. Check enclosure/air-manager package contents.
Manufacturer image; package may include optional accessories
Sources reviewed:
UltiMaker
S8
FilamentManufacturer listed
Build space (mm)
330 × 240 × 300 mm
Max nozzle temperature
Not verified
Dual nozzles
Specifications & sources
Motion system
CoreXY
Usable-area conditions
—
Enclosure / chamber
Enclosed • no dedicated heater
Software
UltiMaker Cura / Digital Factory
Max nozzle temperature
Not verified
Max bed temperature
Not verified
Chamber temperature claim
Not verified
Tools / nozzles
2
Extruder feed path
Bowden / remote feed
Filament diameter
2.85 mm
Abrasive readiness
Not verified
Print-core and material compatibility depend on the chosen core. S-series uses 2.85 mm filament; Factor 4 uses 1.75 mm. Check enclosure/air-manager package contents.
Manufacturer-described automated printing, washing and drying. Final curing is a separate step/module. Initial delivery estimate is March 2027, not guaranteed.
Manufacturer image; package may include optional accessories
Sources reviewed:
No matches. Try another process or clear a filter. Unknown dimensions are excluded by the size filter.
Compare your shortlist
Regional prices, taxes, shipping and included accessories change. Follow the exact package link; no estimated total is presented as a quote.
The LineBoss printer workbench
Will the hardware support your workflow?
A practical preflight—not a compatibility certification. Choose a printer, material and optional part size to expose the dependencies a specification sheet can hide.
Temperature checks use broad starting requirements, not a particular resin or filament recipe. Always follow the material maker’s technical data and the printer’s hardware limits.
Compare the things that change the print.
01
Speed needs context
Travel speed, extrusion flow and finished-part throughput are different measurements. Without a shared test model, material and quality target, a speed ranking would be misleading.
02
Colors are not tools
A filament changer shares one nozzle. Dual nozzles, IDEX, complete toolchangers and hotend-swapping systems have different purge, support-material and workspace tradeoffs.
03
Pixels are not accuracy
Resin pixel pitch describes the optical grid. Resin shrinkage, exposure, supports, Z motion and curing also affect the finished part. A 16K label alone is not a quality score.
Sources, coverage & fair comparisons
This is a dated, source-linked catalog of desktop and workshop machines, not a worldwide production registry. Manufacturer-listed means an official catalog/product listing was found; it does not guarantee stock, a new production run or support in every country. Retired/refurbished-only models and unsubstantiated rumors are excluded. Base/Combo packages are grouped unless their hardware changes the comparison. Kits and material-jetting configurations are identified separately.
Not verified is an information gap, not a claim that a feature is absent. A checked source date does not turn a manufacturer claim into an independent test. No printer receives a paid ranking, invented reliability score or automatic “best” badge.
Upcoming entries have an identifiable maker and a documented machine, specification or working demonstration. Inclusion means worth examining—not an endorsement, a delivery guarantee or a claim that crowdfunding is a retail purchase.
Small manufacturer/project images are used for identification and link to their source. Where a product photo is unavailable, a clearly labeled build-space illustration is shown. Accessories in a photo may be optional.
Specifications and availability need periodic review. Spot a missing current model or a changed specification? Send its official product/specification link so the record can be checked.